Administrator's Guide
Table Of Contents
- Contents
- Introduction
- Initial Setup
- Network Configuration
- Security
- Printing
- Accounting
- Administrator Tools
- Monitoring Alerts and Status
- Configuring Stored File Settings
- Energy Saving Settings
- System Settings
- Taking the Printer Offline
- Smart eSolutions and Billing Information
- Cloning
- Font Management Utility
- Customizing Printer Contact Information
- Updating the Printer Software
- Date and Time Settings
- Watermarks and Annotations
Network Configuration
Phaser 7100 Color Printer
System Administrator Guide
40
WSD
Web Services for Devices (WSD) is the technology from Microsoft that provides a standard method for
discovering and using network connected devices. It is supported by Windows Vista and Windows
Server 2008. WSD is one of the several supported communication protocols.
Before you begin, ensure that the printer and client computers are on the same IP subnet.
Enabling WSD
1. In CentreWare Internet Services, click Properties > Connectivity > Port Settings.
2. Select Enabled next to WSD.
3. Click Apply.
Configuring WSD
1. In CentreWare Internet Services, click Properties > Connectivity > Protocols > WSD.
2. Edit the following settings if required:
• Port Number. The default number is 80.
• Data Receive Time-Out in seconds. The default number is 30
• Notification Delivery Time-Out in seconds. Default is 8.
• Maximum TTL. The default value is 1.
• Maximum Number of Subscribers. The default value is 50.
3. Select Enabled for TBCP Filter.
4. Click Apply.