Administrator's Guide
Table Of Contents
- Contents
- Introduction
- Initial Setup
- Network Configuration
- Security
- Printing
- Accounting
- Administrator Tools
- Monitoring Alerts and Status
- Configuring Stored File Settings
- Energy Saving Settings
- System Settings
- Taking the Printer Offline
- Smart eSolutions and Billing Information
- Cloning
- Font Management Utility
- Customizing Printer Contact Information
- Updating the Printer Software
- Date and Time Settings
- Watermarks and Annotations
Security
Phaser 7100 Color Printer
System Administrator Guide
49
Creating a Request
1. In CentreWare Internet Services, click Properties > Security > Machine Digital Certificate
Management.
2. Click Create New Certificate.
3. Select Certificate Signing Request (CSR).
4. Fill out the form with your 2-Letter Country Code, State/Province Name, Locality Name,
Organization Name, Organization Unit, and Email Address.
5. Click Apply.
6. Values from the form are used to generate a Certificate Signing Request.
7. When the process is complete, you are prompted to save the Certificate Signing Request.
Right-click the link and save the csr.pem file on your computer.
8. Email the file to be signed by a trusted certificate authority.
Uploading a Certificate
When the signed certificate is received from a trusted certificate authority, you can upload the
certificate to the printer. You can also upload certificates, root certificates, and intermediate CA
certificates to establish a complete chain of trust.
1. In CentreWare Internet Services, click Properties > Security > Machine Digital Certificate
Management.
2. Click Upload Signed Certificate.
3. If the certificate is password protected, type the Password, and retype to verify.
4. Click Browse or Choose File, navigate to the signed certificate in the .crt format, then click Open
or Choose.
5. Click Import.
Note: The signed certificate must match the CSR created by the printer.
Managing Certificates
To see information about the certificates installed on the printer or specify the certificate to use for SSL
and IPsec:
1. In CentreWare Internet Services, click Properties > Security > Certificate Management.
2. Select a certificate Category, Certificate Purpose, and Certificate Order.
3. Click Display the list.
4. Select a certificate from the list and click Certificate Details.
5. To set the certificate as the primary certificate, click Use this certificate. If Use this certificate is
not available, then the selected certificate has expired, or is not valid. All certificates in the
certification path (chain of trust) must be installed on the printer and be valid.
6. Click Delete to remove the certificate, or Export to save the certificate to your computer.