Administrator's Guide
Table Of Contents
- Contents
- Introduction
- Initial Setup
- Network Configuration
- Security
- Printing
- Accounting
- Administrator Tools
- Monitoring Alerts and Status
- Configuring Stored File Settings
- Energy Saving Settings
- System Settings
- Taking the Printer Offline
- Smart eSolutions and Billing Information
- Cloning
- Font Management Utility
- Customizing Printer Contact Information
- Updating the Printer Software
- Date and Time Settings
- Watermarks and Annotations
Administrator Tools
Phaser 7100 Color Printer
System Administrator Guide
79
System Settings
Setting Default System Settings
1. At the printer control panel, press Menu.
2. Navigate to Admin Menu > System Settings to set the default system settings.
3. Change the following settings as necessary:
• Start up page: Select Print to print the start up page every time you request a print job.
• Alert Tone: Set the alert tone as Soft, Normal, Loud, or Off.
• Auto Clear: Set the system to display when a certain amount of inactive time, in minutes, has
passed.
• Dew Prevention: Set Enabled to prevent dew formation.
• Set Jobs View: Specify the types of jobs that display when the Job Status button is pressed.
4. Press OK.
Setting the Paper Size Preference at the Control Panel
1. At the printer control panel, press Menu.
2. Navigate to Admin Menu > System Settings > mm/inches.
3. To display paper sizes in inches or metric, specify the measurement for the units.
4. Press OK.