Operation Manual

Fax Options - Fax
99
Proportional %
• Text box - Allows you to specify a desired reduction/enlargement ratio using the
scroll buttons. You can also enter the value by touching the text box and using the
numeric keypad on the control panel. The value can be specified within the range of
25-400% in 1% increments.
• 100% - Scans at the same size as the original document.
• Auto % - Automatically reduces/enlarges the image of the document to fit on the
paper size selected on the remote machine, after scanning the document at its
original size.
NOTE: The [Auto %] option is not available for Server Fax.
• Presets - Allows you to select a reduction/enlargement ratio from the seven preset
ratios. The presets are set up by the System Administrator.
Enter Output Size
Allows you to select an output size from the standard paper sizes.
NOTE: The [Proportional %] and [Enter Output Size] buttons do not appear for Fax or
Internet Fax. However, the options for [Proportional %] are available.
Fax Options - Fax
This section describes how to specify options for fax transmissions. For information on
the features available, refer to the following:
Confirmation Options – page 100
Starting Rate – page 100
Priority Send/Delay Start – page 100
Transmission Header Text – page 102
Recipient Print Sets – page 102
Multiple-Up – page 103
Remote Mailbox – page 103
F Code – page 104
1. Make sure that the Fax service is enabled.
2. Press the <All Services> button
on the control panel.
3. Select [Fax] on the touch
screen.
4. Select the [Fax Options] tab.
Use the side tabs to switch
screens.
5. Select the required feature.