Operation Manual

Service Settings
WorkCentre™ 5735/5740/5745/5755/5765/5775/5790
Administration and Accounting
263
Service Settings
The Service Settings are used to customize options which
are specific to individual services, such as Copy, Fax or Print.
Feature Defaults
Select the Feature Defaults option to access the following
settings:
• Set Fax Defaults on page 263
• Set Copy Defaults on page 263
• Set ID Card Copy Defaults on page 263
Set Fax Defaults
Use to select the default settings for each programing feature within the Fax service, such as 2-Sided
Scanning, Original Type and Resolution.
• Select the default required for each feature in each of the programing tabs.
• Select End Defaults. The settings selected become the default settings for each Fax job.
• A confirmation screen is displayed, select Done to return to the previous screen.
Set Copy Defaults
Use to select the default settings for each programing feature within the Copy service, such as Paper
Supply, Copy Output and 2-Sided Copy.
• Select the default required for each feature in each of the programing tabs.
• Select End Defaults. The settings selected become the default settings for each Copy job.
• A confirmation screen is displayed, select Done to return to the previous screen.
Set ID Card Copy Defaults
Use to select the default settings for each programing feature within the ID Card Copy service, such as
Paper Supply, Image Quality - Side 1 and Image Quality - Side 2.
• Select the default required for each feature.
• Select End Defaults. The settings selected become the default settings for each ID Card Copy job.
• A confirmation screen is displayed, select Done to return to the previous screen.