Administrator's Guide

Security
74 Xerox
®
WorkCentre
®
5945/5955 Multifunction Printer
System Administrator Guide
Configuring Xerox Secure Access Unified ID System Authentication Settings
When Xerox
®
Secure Access authentication is configured, users swipe a pre-programmed identification
card at the control panel. The printer compares the user credentials to the information stored on the
Xerox
®
Secure Access server. To use Xerox
®
Secure Access, purchase and install the Xerox Secure Access
Unified ID System.
To configure access rights using Xerox Secure Access Unified ID System authentication:
• Install the Xerox
®
Secure Access authentication server software and configure it with user accounts.
For details, see the Xerox Secure Access Unified ID System documentation.
• Enable the Authentication and Accounting Configuration Web service. For details, see HTTP on
page 58.
• Format and configure identification cards.
• Connect your card reader to the USB Port.
• Set the login method to Xerox Secure Access - Unified ID System For details, see Setting the Login
Method on page 69.
• Configure Xerox
®
Secure Access Setup settings.
• Enable the Xerox
®
Secure Access Web service. For details, see HTTP on page 58.
• If you enabled Personalization, configure LDAP server settings. For details, see LDAP server settings
on page 53.
• Configure authorization settings. For details, see Authorization on page 88.
The Login Methods page in CentreWare Internet Services provides links to authentication and
personalization configuration settings.
1. In CentreWare Internet Services, click Properties > Login/Permissions/Accounting.
2. Click Login Methods.