Manual

2. Select the Maintenance tab. You will be prompted for a User ID and Password. The
factory defaults are:
User Name: admin Password: 1111
3. Select Firmware Upgrade.
4. Select the Machine Firmware Download radio button.
5. Browse to the location where you unzipped the firmware upgrade files. Choose the file
WCM20I_Vxxx_smd.hd
6. Select Upgrade. A message will display confirming the upgrade, click OK. A pop-up will
display End of download. Click OK.
7. The WorkCentre M20/M20i will display a Program Upgrade Please Wait… message on
the User Interface.
8. After a few minutes the WorkCentre M20/M20i will reboot. Do not proceed until M20
reboots
9. Repeat above steps, but choose file WCM20I_Vxxx_kit-emul.hd in step 5.
10. Repeat above steps, but choose file WCM20I_Vxxx_psiii.hd in step 5.
11. After a few minutes the WorkCentre M20/M20i will reboot.
12. Print the System Data report and confirm the Firmware Version upgraded to the latest
version.
© 2009 Xerox Corporation. All Rights Reserved. Xerox ®, the sphere of connectivity design, and
WorkCentre® are trademarks of Xerox Corporation in the United States and/or other countries.
2