Manual

ManualsBrandsXerox ManualsMultifunction DevicesWorkCentre M24-3958

Fig. 1-2

Select Port Status.

Fig. 1-3

Place a checkmark in the Enable box next to Salutation. Select Apply

New Settings.

If a checkmark already appears in the Enable box next to Salutation

skip the remaining steps in this pamphlet and continue to Retrieving

Scanned Documents Using Scan Driver Part 2 of 2.

Fig. 1-4

Enter the Administrator Name and Password. Click OK. (See

Machine Administrator User Guide for default password.)

Note: This screen might not appear if the Administrator Name and

Password have already been entered.

Fig. 1-5

The "Settings have been changed." confirmation screen appears. Click

Reboot.

Fig. 1-6

Click OK. (The WorkCentre M24 will take approximately 5 minutes to

reboot.)

Fig. 1-1

Open an Internet browser, in the Address field enter the IP address of

WorkCentre M24 and press Enter. On the Internet Services screen

click Properties.

Retrieving Scanned Documents Using Scan Driver - 1 of 4

Summary of content (4 pages)

PAGE 1
Fig. 1-1 Open an Internet browser, in the Address field enter the IP address of WorkCentre M24 and press Enter. On the Internet Services screen click Properties. Fig. 1-2 Select Port Status. Fig. 1-3 Place a checkmark in the Enable box next to Salutation. Select Apply New Settings. If a checkmark already appears in the Enable box next to Salutation skip the remaining steps in this pamphlet and continue to Retrieving Scanned Documents Using Scan Driver Part 2 of 2. Fig.
PAGE 2
Quick Start Guide Retrieving Scanned Documents Using Scan Driver Part 1 of 2 Fig. 1-7 If the message "Your request was successfully processed." is not displayed, repeat the steps in this pamphlet. Continue with Retrieving Scanned Documents Using Scan Driver Part 2 of 2.
PAGE 3
Fig. 2-5 Select the scanner and click on Select Scanner. Fig. 2-1 From desktop Operating System Select All Programs | Xerox | Utility | Mailbox Viewer2. Note: This screen may vary depending on the operating system of the computer. Fig. 2-3 Select Change Display. Select Use network. Make sure Display registered scanners is checked. Click on Add. Enter IP Address and Scanner Name. Click on OK. Fig. 2-6 Enter Mailbox No. and Password. Select Open Mailbox. Fig.
PAGE 4
Quick Start Guide Retrieving Scanned Documents Using Scan Driver Part 2 of 2 Fig. 2-8 Ensure the Auto Import box is checked. Select Import Settings. Fig. 2-10 Select OK. Fig. 2-11 Select Import. Fig. 2-9 In the Save in field enter the path of the folder in which you want your scanned images to be saved. Select OK.