Owner's manual

Fig. 3-4
Scroll down and click Apply New Settings.
Fig. 3-3
On the left hand side, click on the Protocol Settings folder and click
on E-mail. Select POP3 in the Receiving Protocol field. Enter a
working POP3 Server Address, POP3 User Name, POP3 User
Password and Confirm Password in the appropriate fields.
Note: If you will not be using WorkCentre M24 to receive Internet
faxes, please disregard this pamphlet.
Requirements For iFax Receiving:
1. A known working Mail (POP3) Server
Address (obtain the address from your local IT
Administrator or Internet Service Provider).
2. A known working username and password for the
Mail (POP3) Server from which you are retrieving
e-mail.
Fig. 3-1
Open an Internet browser, in the Address field enter the IP address of
WorkCentre M24 and press Enter. On the Internet Services Screen
click Properties.
Fig. 3-2
Click on Port Status on the left hand side. Make sure that there is a
checkmark in the Enable box next to Receive E-mail.
Fig. 3-5
Enter the Administrator Name and Password of the WorkCentre M24.
Click OK. (See Machine Administrator User Guide for default
password.)
Internet Faxing / iFax - 5 of 6