Manual

PE 220 Vista Scan Driver Installation

1. Download the PE 220 Scan Driver and extract to a local folder.

2. Connect the USB Cable from the computer to the PE 220. After a minute, the

“Found New Hardware” dialog will appear.

3. When the Found New Hardware Wizard opens, select “Locate and install driver

software (recommended)” 



PAGE 1
PE 220 Vista Scan Driver Installation 1. Download the PE 220 Scan Driver and extract to a local folder. 2. Connect the USB Cable from the computer to the PE 220. After a minute, the “Found New Hardware” dialog will appear. 3.
PAGE 2
4. Select “Don’t search online” 5.
PAGE 3
6. Select “Browse my computer for driver software (advanced)” 7. Browse to the folder containing the PE 220 Scan driver that was downloaded in step 1 and select “Next”.
PAGE 4
8. Driver software will be installed. 9. A message indicating “The software for this device has been successfully installed” will be displayed. 10. Select “Close” to complete the installation.