WorkCentre User Guide PE220

3 Paper Handling
3-2 Xerox PE220
Selecting Print Materials
You can print on a variety of print materials, such as plain paper, envelopes,
labels, and transparencies. Always use print materials that meet the
guidelines for use with this machine. See Paper Specifications on page 10-6.
To get the best possible print quality, use only high-quality copier-grade paper.
When you choose print materials, consider the following:
• Size: You can use any size paper that fits easily within the paper adjusters
of the tray.
• Weight: 16 ~ 24 lb (60 to 90 g/m
2
) for the tray when feeding multiple
pages, and 16 ~ 43 lb (60 to 165 g/m
2
) for the manual tray and the tray
when feeding a single page.
• Brightness: Some papers are whiter than others and produce sharper,
more vibrant images.
• Surface smoothness: The smoothness of the paper affects how crisp the
printing looks on the paper.
CAUTION: Using print materials that do not conform to the
specifications listed on page 10-6 may cause problems that may require
service. This service is not covered by the warranty or service
agreements.
Paper Type, Input Sources, and Capacities
NOTE: If you experience excessive jamming, load one sheet at a time
through the tray or manual tray.
NOTE: Maximum capacity may differ depending on media weight, thickness,
and environmental conditions.
Paper Type
Input Tray/Capacity
Tray Manual Tray
Plain paper 150 1
Envelopes 1 1
Labels 1 1
Transparencies 1 1
Card stock 1 1