User's Manual
Table Of Contents
- Table of Contents
- 1. Safety
- 2. Welcome
- 3. Assemble the Scanner
- 4. Installation
- 5. Loading Documents to Scan
- 6. Maintenance
- 7. Appendix A: Regulatory Information
- 8. Appendix B: Compliance Information
Xerox
®
Duplex Combo Scanner Maintenance
6-10 User Guide
5. Remove the tensions spring that is located under the ADF pad.
6. Place the new tension sping in the scanner.
7. Place the new ADF pad in the scanner and rotate it back into place.
8. Press down on the ADF pad until you hear a "click" when it locks in place.
9. Close the scanner when you’re finished.