User's Manual

22
PRELIMINARY SUBJECT TO CHANGE
The final RF input is the maximum distance between master/slave radios. This distance determines the
propagation delay so that a short distance will have less delay and a higher throughput. The higher that
this parameter is, the lower the data speed but setting this parameter to a smaller value than the actual
separation can result in higher error rates. Important: this parameter must be the same for all radios in
a given network.
Maximum Separation
This parameter specifies the maximum distance in km between radios.
Larger values result in lower throughput due to time allocated for
propagation delay.
Current value = 2 km
Enter new value (0 - 200) or Esc to exit: