Installation and Operating Manual

16
BSN250 Guide
xG Technology Inc. Proprietary and Confidential Information
Viewing the base station aCtiVity log
A log of base station activity, such as update requests and errors, can be viewed using the Logs screen of
the Web configuration interface.
The screen shows the log on the base station at the time when the page was loaded.
To update the snapshot of the log file, click
Refresh.
To delete the log of entries stored on the base station, click
Clear Log.
updating the xmax bsn-250 firmware
The firmware on the base station can be updated using the SW Upgrade screen of the Web configuration
The screen shows current firmware version information for the BSN-250. If an update is available, the screen
lists these as alternate versions.
To apply an update to the base station, click
Browse to select the upgrade file, then click
Update. First, the file will be uploaded to the base station, then the update process will begin.
To stop the upload process, click
Cancel. After the upload has completed and the update pro-
cess started, the operation cannot be canceled.
powering off the bsn-250
Use the following steps to turn OFF the system:
Flip the front toggle switch to the OFF position. The two main power LEDs to the left of the power switch
will change from green to red.
Flip the back toggle switch to the OFF position.
•
•
•
•
1.
2.
interface.