Installation and Operating Manual

3
xG Technology Inc. Proprietary and Confidential Information
introduCtion
The xMAX BSN-250 VoIP Base Station is a three-sector, 18-channel system used to communicate with xMAX
handsets and modems operating in the 900 MHz band. The BSN-250 is preconfigured with all software
required to transmit and receive voice and data to and from xMAX handsets and modems. This guide pro-
vides basic information on how to install, configure, and operate the base station.
ATTENTION: This symbol is used in this guide to draw attention to precautionary steps and
safety-related instructions. Failure to follow these instructions may result in a safety hazard
and/or damage to equipment.
physiCal system
As shown in Figure 1, the xMAX BSN -250 includes the following components, each packaged separately:
One control unit (labeled “CU”)
One RF unit (“RU”)
Three sector units (“SU1”, “SU2”, and “SU3”)
One power supply unit (“PSU”)
•
•
•
•