Manualshelf

Installation and Operating Manual

ManualsBrandsxG Technology ManualsElectronicsxMax VOIP Base Transceiver Station
12345678910
7
xG Technology Inc. Proprietary and Confidential Information
ATTENTION: Before turning ON the system, be sure you have connected the antennas using the
recommended coaxial cable to the chassis mount BNC connectors installed on the rear of
the unit. The cables and antennas serve as a load to the xMAX BSN-250. Never turn the
system ON without first installing the cable and antennas.
10. The system is now ready for operation.
Figure 3: Power Connector and Rear Power Switch