Manual

Page: 5 Copyright 2020 XGuard RC. All rights reserved
Plug the XGuard
Plus cable into any
open port
-Power the unit.
-The blinking red light stops
blinking when the voltage
is stabilized.
-The Yellow LED indicates it’s charging.
-The Blue LED indicates it’s at 60% charge.
-The Green light means GO (enough to start ying)
The unit will keep the charge after the day’s rst
charge and the green will light on very quickly after
topping o󰀨 the charge.
INSTALLATION
OPERATION
Note: If after the startup blinking Red LED you see
a blinking Yellow LED it means the supply voltage
from your aircraft BEC hasn’t reached the 3.5V
minimum to start operations. Check your BEC