Reference Guide

2.2 List of applicable FCC rules
FCC Part15 Subpart C, Section 15.247, FCC Part15 Subpart E, Paragraph 15.407
2.3 Specific operational use conditions
Sufficient Power Supply
Wi-Fi Module is a mini-PCIe module and would be attached to the mini-PCIe interface of the
main device. As the transmitter power would require adequate power supply to the module for
good performance, it is important to have at least 3.3V and 1A supplying to the module.
The information in this article, including the URL for reference, if there is any change, without
prior notice.
Documents are provided by the current version without any guaranteed responsibility, including
merchantability, suitable for any particular purpose or non-infringement guarantees, and any
guarantees presented by any proposal, specification, or sample mentioned elsewhere. This
document has no responsibility, including the use of the information within this document
produced by the infringement of any patent rights. This document in this, by estoppel or
otherwise, grant any intellectual property licensing, whether express or implied license.
All the mentioned brand names, trademarks and registered trademarks presented in this
document are the property of their respective owners, and hereby declare.
FCC regulatory information
This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
End Device Labelling
Please notice that if the FCC identification number is not visible when the module is installed
inside another device, then the outside of the device into which the module is installed must
also display a label referring to the enclosed module. This exterior label can use wording such as
the following: “Contains FCC ID: 2AS2S-M882E2” or any similar wording that expresses the same
meaning may be used.
RF Exposure Compliance
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of