Product Manual

fastened tightly to avoid damage lines.
3)
Fasten the smart terminal on the trolley body with 3 “M5*25 hexagon socket head cap
screws with flat spring washer” as shown in the diagram 4.1 and then check whether there is gap
on the rear end. If there is a big gap, adjust the installation to avoid pressing lines.
Due to the matched serial number of smart terminal and weight sensor of the trolley, the
smart terminal cannot be randomly replaced after installation.
4.4 List of Commonly Used Spare Parts and Tools
5. Precautions for Installing Wall-mounted Charging Device
5.1 Component Diagram
No.
Part Name
Quantity
Function
1 Fine Thimble 1pcs Smart Terminal Power On/Off
2 4mm Allen Wrench 1pcs Fastening Smart Terminal
3
3
Screws Fastening Smart
Terminal
1pcs
Fastening Smart Terminal On Trolley
Body (Spare Part)
4
Wrench for Installing Wheel
1pcs
Installing Wheel (Providing in Bulk
Order)
5 6mm Allen Wrench 1pcs
Fastening Basket and Sensor in
Routine Maintenance (Providing in
Bulk Order)