Product Manual

6)
In installation, make sure any scrap iron or other metal object will not go inside the device to
avoid short circuit and electric shock.
7)
The power socket on a wall for the charging device shall be 1000W or more. To avoid
potential safety hazard due to multiple plug
-
ins/outs, a socket with switch button on it is
recommended for daily maintenance and operation (the above diagram only for reference).
5.3 Prohibitive Scenarios for Usage
1)
Conductive pole piece and magnet fall out or go black or deformed due to heat at the joint or
other poor connection scenarios.
2)
The front and rear shells of plastic parts fall out separately.
3) The power connecting wires and charging connector fall out with interior wires coming out.
4) Conductive metal comes out of the broken exterior layer of power connecting wires.
6. Instructions for Trolley Usage
6.1 Power On/Off
Power On: Use a fine thimble/clip to press on the button once to power on.
Power Off: Use a fine thimble/clip to press on the button once to power off.
6.2 Network Requirement and Connection Setup
(1)Network Requirement
ʒ The trolley can connect with outer network with more than 100M bandwidth;
ʓ AP frequency 2.4GHZ and 5GHZ;
ʔ The absolute value of network intensity is less than 70dbm when the network signal covers
each corner of the store.
ʕ If the trolley connects with public network in the store, a network segment shall be used
specifically for the shopping trolley with password.
Main Switch
Fine Thimble