Product Manual

4. Trolley Assembly
4.1 Component Diagram
4.2 Diagram for Connecting Smart Terminal With Trolley Body
4.3 Installation Steps
1) The serial number is printed on RFID label inside the front end of the trolley body. The
serial number on the back side of the smart terminal to be installed on the trolley shall be
consistent with the serial number of the trolley body.
2) Connect the connecting line according to 4.2 diagram and make sure the connector is
Electric
Protection
Protection Against Overcurrent,
Overvoltage Charging, Overload,
Short Circuit, Under
-voltage
Discharge, and Protection for
Charging and Discharging
Current and Voltage and
Temperature Control
Working
Environment
Temperature
-20ć~70ć;
Humidity
20%~90%RH
Storage
Environment
Temperature
-40ć~85ć;
Humidity
10%~95%RH
Schematic Diagram for Power Cables
Connected
Schematic Diagram for Weight
Sensor Connected
3 M5*25mm
Screws