Operation Manual

Chair Installation

Power cord of

LOGO board

Installation of side panels

Step I

1, Align the holes of the inner panel with the mounting holes of the seat frame by

locking 5 screws. Figure ① (M6x20 hexagon socket screw*1, M6x20 round head

screw*5)

2, Install air bags into the air inlet connector which must be connected with the

corresponding colors; then connect the wire to the air valve plate, and ﬁx it tightly

with a wire harness after the connection. Figure ②

※ The left side connecting line needs to be wound from the inside to the armrest

cover ﬁrst.

※ After connecting the wire with the inner lamp cover terminal of the upper cover on

the armrest, lock and ﬁx it with a ﬁxed button. Figure ③

Figure ①

M6x20 hexagon socket screw

M6x20 round head screw

Figure ② Figure ③

Air valve signal

adapter

Air valve signal line