Operation Manual

Adjustment method of Chair

Ԧ is Zero Gravity

Ԧ is Cradle

Ԧ is Lie Down

Ԧ is get up

Sitting Posture Adjustment

1. Press to enter the sitting posture adjustment interface, there are 4 sitting modes:

2. The best position can be adjusted by long pressing the 6 direction buttons.

3. After selecting the best position, touch the button to conﬁrm. If you do not select within 10 seconds,

this page will exit.

A. Hand Controller - Sitting Posture Adjustment Interface

Back Higher/Back lower

Calf Higher/Calf lower

Leg Extention

3. The button, can be used after product is turned on, press this button, the chair will be adjusted to

zero gravity state.

4. The button, can be used after product is turned on, press this button, the chair will start the back

push rod, simulate the cradle state.

5. The button and button, can be used after product is turned on, press these buttons, the chair

will start the air pressure, respectively open the stretching, twisting mode.

2. Press button, it will pause all the actions of the massage chair, and the screen will appear pause

interface; press again to restart.

1. Press button, you can turn on or turn o the massage chair. When turn on the massage chair,

adjusting the seat to a comfortable angle by default and lifting your feet.

(you can modify this feature in the setting interface)

6. , press these 4 buttons, can adjust the corresponding sitting posture.

B. Quick Adjust Buttons

Zero gravity Cradle

On/O

Calf Higher

Stretch Twist Pause

Back Higher

Calf Lower Back lower

Please do not sit on the backrest, armrests, legrest, shoulders to prevent the user or massage

chair from tipping over, resulting in an accident or injury.

When laying down the back of the chair or lowering the legrest, please make sure that there

are no people, no pets, and no objects behind and below the legrest. Otherwise it will cause

an accident.

Please Note!