Instruction Manual

Buzzer
Status 
Appearance Power ON/OFF and Restart Bluetooth Connection USB Connection
Interface Setting
Bluetooth Connection
The scanner can communicate with the host by RS-232 serial port
or USB port. The user can switch to the corresponding interface by
replacing the cable and scanning the corresponding barcode below.
(1) Set Shut-down/Start-up Time
Power On

Scan Successfully Once
Handheld Barcode Scanner
Instruction Manual
HN-1358SR
Indicator Scanning Window 
 
▲
Shut down:


touch).
▲
Restart:


▲
Start up:


to start the scanner.


indicates that it is connected and can be used normally.


switch to the keyboard mode.
Disable
5min
10min 15min
30min 60min
（2） Pop up iPhone Keyboard by Bluetooth
Enable Disable
（2）USB Virtual Serial Port
（3）Bluetooth
（1）USB Virtual Keyboard
①
②
③
④
⑤
⑦
⑥
