User Instructions

ManualsBrandsXiamen Helios Technology ManualsAudio EquipmentBluetooth Speaker

Bluetooth Speaker

PTUV-01

1. Brief introduction:

This system is a music player office chair with wireless Bluetooth

connectivity function.

1. With Bluetooth music module, in order to connect smoothly within maximum 10

meters straight line.

2. Stereo 5W X 2 channel amplifier high-fidelity audio output.Support for subwoofer

output

3. Support audio input and headphone function

2. Structure Description:

The system consists of left and right channels of high quality speakers, a main control

box, a charger, a motor , Audio line.

Control

Box

Subwoofer

Adapter

high-pitched speaker

Motor

Summary of content (5 pages)

PAGE 1
Bluetooth Speaker PTUV-01 1. Brief introduction: This system is a music player office chair with wireless Bluetooth connectivity function. 1. With Bluetooth music module, in order to connect smoothly within maximum 10 meters straight line. 2. Stereo 5W X 2 channel amplifier high-fidelity audio output.Support for subwoofer output 3. Support audio input and headphone function 2.
PAGE 2
3. Instructions DC Port ON/OFF Power Indicator BT indicator Audio input Audio output STEP 1: Plug the adapter output into the ‘DC PORT’and plug the adapter into the home outlet. STEP 2: Turn the unit ON. When the green light flashes and you hear the prompt tone, the Bluetooth pairing mode is turned on. Turn on your phone's Bluetooth and find the following device name "gamingchair" and connect. (Note: It is only connectable to one devise at one time.
PAGE 3
4. The Main Parameters: Input rating: DC 12V 1.2A stand-by current : ≤10mA Temperature Range: -20oC to +70oC Wireless transmission range: 10 meters Sensitivity: -80dBm<+/-0.1%BER Frequency range: 2.4GHz-2.480GHz Audio Performance : Support AAC, MP3, SBC, Stereo Audio signal to noise ratio: ≥75dB Distortion: ≤0.
PAGE 4
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference. (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
PAGE 5
Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1)l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter toutbrouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement. CAN ICES-3(B)/NMB-3(B) L'appareil a été évalué pour répondre aux exigences générales en matière d'exposition aux RF.