Contents 1.0 Discriminating 2.0 Safety Guidelines .. 3.0 Maintenance 4.0 Package Contents 5.0 Drone Details 6.0 Preeminent RAIDER TO JOY SUCK ABORT 80 Installation Drone Battery Phone Holder... BG TRAINING sessions domes 10.0 Operation Guide Download APP toms Connect to WI-Fi. Pairing Calibrating the Gyro Laughingstock the Motors Aue Takeoff .. ONE KEY LONGING 11.0 Functions Details Take Photo/Record Video Trimmer 360° Flip Altitude Hold Function . Headless Mode 12.0 Specifications 13.0 Contact US we.
1.0 DISCLAIMER & WARNING 1. Please read this Disclaimer & Warning and Safety Guidelines carefully before using our product. This product is not recommended for people under the age of 14. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. You agree that you are responsible for your own conduct and any damages caused while using this product, and its consequences.
@ Ensure to do 2 thorough check of the product before each use. Inspect the integrity of the parts, any signs of cracks and wear of the propeller, battery power and effectiveness of the indicator, etc. If after suing a complete check of the drone any problems are found, please refrain from using it until the problem has been resolved. 2.
2.3 Operation Requirements (D DO NOT use this product to follow any roving vehicles, @ During the flight, turn off the motors only in case of an emergency. (D Fly the dona back to you 2s soon as you are notified that the battery is running low, @ This product should not be used while drinking alcohol! or consuming drugs, if you are feeling fatigued, taking medicine, or feeling any physical discomfort. ® Be aware of the volume of nose that the drone produces.
( Only use the USB charging cable that comes with the drone to charge the battery. @ DO NOT connect the battery directly to wall outlets or car cigarette -lighter sockets as this will damage your battery as they are 2 different voltage. @ DO NOT attempt to disassemble or modify the battery In any way 0 DO NOT use the battery if it gives off an odor, geneses heat, becomes discolored, deformed or appears abnormal in any way.
3.0 MAINTENANCE D Clean the product after each use with a clean, soft cloth. @ Avoid prolonged exposure to direct sunlight and avoid buildup of heat on the drone or batteries. @ This device Is net waterproof and must not be submerged or subjected in water under any circumstance. Failure to keep the device completely dry will result in the failure and permanent damage to the unit.
4.
6.0 TRANSMITTER DETAILS Phone Holder Take Photo 360°Flip/ carefree Video Headless Mode Gong Press) TN YO tong Press) Left Joystick! Sf _ Right Joystick! Speed Trimester = = Cine Key Takeoff Power Switch & Landing! N Emergency Stop Gang Press Battery Cover Battery Compartment TRANSVAAL Hot induced) Open the battery cover on the back of the transmitter, insert the three AAA batteries {Not included) info the battery compartment, and close the battery cover lo complete the installation.
7.0 JOYSTICK MODE 7.1 MODE 2 (Default Setting} a Hah tic ascend 4 Descend Left 72, Right Fi wf Uh oye 7.
8.0 INSTALLATION 8.1 Propellers Installation: shown above, install the propeller on the motor shaft according to the "A/B" corresponding position and manually tighten the propeller, #4 The drone will not fly unless the correct propeller is installed on the correct motor shaft.
8.2 Propeller Guard As shown in the picture above, install the propel guards to the mater base. Make sure that the propeller guards are clamped fo the motor base to avoid the Unnecessary loss and damage during flight. 8.3 Drone Battery dict Pict installation: As shown in Pic 1, push the battery correctly into the drone battery compartment.
8.4 Phone Holder @ Push the phone hider into the notch on the top of the transmitter, Adjust the phone holder upward or downward according to the size of your mobile phone.
2.0 CHARGING USB Adapter (EVOKE-208) N5 Power Bank B Computer USE Port 1} When the drone battery runs low, the indicator lights on the drone will blink continuously. After about 3C seconds, the drone will land autocratically. 2} Remove the battery and connect the USB charging cable to the battery charging port.
10.0 OPERATION GUIDE 10.1 Download APP Android APP on Google play Scan the QR code, corresponding to either App Store™ or Google Play ™ Store and download the Drone Planet app for free. 10.2 Connect to WI-Fi of Horton wees 5 Turn on the drone, and then connect your smart phone to the WI-Fi network created by the drone. Check the drone's status in the Drone Planet app.
All of the following operations on this Manuel takes MODE 2 for armpit. 10.3 Pairing @ Long press the Power Switch 4 = Parana button to tum on the drone and the indicator fight on the drone b= ey) Yr begins to flash. Long Press @ Place the drone on a flat and vela! surface with the head forward and the tail facing towards the @ Short press the Power Switch button on the transmitter to turn it on. @ Push the left joystick up then down to pale the dine with the transmitter.
10.4 Calibrating the Gyro Simultaneously push the left joystick and the right joystick to the bottom right corner to calibrate the gyro. The Indicator lights on the drone change from flashing to tum solid, indicating that the calibration is completed. Tips: To ensure 2 stable fight, we suggest that the pilot calibrates the gyro every time after pairing the drone and after a crash. 10.
10.6 Auto Takeoff There are two methods to take off the drone. Method: Takeoff After pairing/calibration, unlock the motors, then press the One Key Freestanding button, the drone will take off automatically and hover at 5 fet altitude. At this time, you can contra this drone by using the joysticks, Method 2: fog TR, € Le After paling, pick up the drone and ay it flat on your palm, Gently toss the drone into the air, and it will hover in place.
10.7 One Key Landing Landing During the flight, press the One Key Takeoff Landing button, the drone will land on the ground automatically. 11.0 FUNCTIONS DETAILS 11.1 Speed Switch This drone comes with 2 speed modes (Low/High). Press in the Left Joystick to switch the speed. “Di Indicates Low Speed and “ON OF indicates High Speed.
11.2 Emergency Stop &% The Emergency Stop function should only be used In case of emergency during the flight to veld any of damage or injury. Long Press During the flight, long press the One Key Longstanding button, the motors will stop immediately. Attention: Be aware that you risk breakage of the drone if it falls a large distance or hits anything at 2 high rate of speed, 11.
11.4 Trimmer Press in the direction joystick to ante the Trimmer, and press in the direction joystick again can exit the Trimmer, F/B Side ward Fly Trim: To enter the Trimmer, If the drone tends to drift forward, you can push the direction joystick down to re-balance the drone.
11.5 360° Flip When you get familiar with ali the functions of the drone, you can try this amazing flip mode. When you fly the dine at least 10 feet, short press the 360° Flip button on the transmitter, then push the right Joystick Forward/Backward or Left/Right, and the drone will do a Rip towards the corresponding direction. 5H This function will perform better when the battery is fully charged, 11.
11.7 Headless Mode £ Please familiarize with the Headless Mode function first before using this mode, otherwise It is easy to lose the drone and cause unnecessary loss, 1. After pairing/calibration, long press the Headless Mode button on the transmitter. The transmitter will make a long beep, the indicator lights on the drone continue to flash to Indicate that It Is in Headless Mode. 2.
Sepia make the pilot stays facing the same direction a5 the direction that the head of the drone faces at take-off. Under Headless Mode, the forward direction is the direction that the head of drone faces when the drone takes off. in order to make sure the pilot can tell drone’s direction, we recommend that the pilot to stay in the same orientation as the drone head faces when the drone takes off.
12.0 SPECIFICATIONS * DRONE Model THIS Weight: Pax Flight Time:11 minutes {per battery} Rotor Mode: 716 Operating Temperature Range: 32° to 104°F (0° to 40°C} Size: 88x55x45mm Folded) 134x126x45mm (Unfolded) * TRANSMITTER Operating Frequency: 2456-2480MHz Max Fight Distance: 98 forefeet {outdoors and unobstructed) Operating Temperature Range: 32° to 104°F [0° to 40°C) Battery: 1.
» CAMERA Operating Frequency: 24 GHz Photo Resolution: 1520x1080 Video Resolution: 1280%730P Lens Angle: 60° Max Transmission Distance: 98 forefeet {outdoor and unobstructed) Live View Quality: fps Photo Formats: JPEG Video Formats: Avila Operating Temperature Range: 32° to 104°F * LSB CHARGER Voltage: 5V Rated Power; <10W 13.0 CONTACT US Please do not hesitate to contact us if you need further support.
14.0 GENERAL INFORMATION FCC Notice: This device complies with Part 15 of the FCC flues. Operation Is subject to the following two conditions: {1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the lie nits for & Class B digital device, pursuant to Part 15 of the FC Rules.
CAN NUMB-3 (B} RF Exposure Radiation Exposure Statement: This equipment complicates with ({ radiation exposure meets set forth far an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body.
3. Please replace the battery if the battery is dropped or has any peculiar smell, overheating, discoloration, deformation or leakage happens. 4. Never use anything other than the approved LPs Charger to charge the battery, Always use a balancing charger for Li Po cells or a Li Po cell balance. It is recommended that you use the one provided with the product. 5. The battery temperature must never exceed otherwise the battery could be damaged or ignited, 6.
15. The packaging has to be apt since it contains important information, 16. The toy is only can be connected to the equipment with symbol Class Ih, Caution 1. Tha max operating of the EUT Is 45°C. and shouldn't be lower than 10°C 2.The device complies with RF specifications when the device used at Om from your body, 3. Dedlaration of Conformity.
MANUFACTURER INFORMATION Manufactured by Xi amen Shijiazhuang Import & Export COLD. Room 703,No.
