Instructions For Use V 2.0 HS210 usa@holystone.com (USA) ca@holystone.com (CA) +1(855) 888-6699 eu@holystone.com (EU) jp@holystone.com (JP) www.holystone.
Contents 1. Disclaimer&Warning ........................................................................ 2. Safety Guidelines ............................................................................... 3. Maintenance ...................................................................................... 4. Packing Contents .............................................................................. 5. Drone’s Details .................................................................................. 6.
< DISCLAIMER & WARNING > 1. Please read this disclaimer carefully before using our product. This product is not recommended for people under the age of 14. By using this product, you hereby agree to this disclaimer and signify that you have read it fully. You agree that you are responsible for your own conduct and any damage caused while using this product, and its consequences .
Do not mix new and old batteries as this can lead to a poor performance of the product. Dispose of used batteries carefully, do not litter. Please keep dead batteries away from heat and fire. If the device is not going to be used for an extended period of time, remove batteries to prevent potential damage from battery leakage. It is recommended to only use the USB charging cable that comes with the drone to charge the battery. Don`t attempt to disassemble or modify the battery in any way.
< MAINTENANCE > 1. Clear the product after each use with a clean, soft cloth. 2. Avoid prolonged exposure to direct sunlight and avoid buildup of heat on the drone. 3. This device is not waterproof and must not be submerged in water under any circumstance. Failure to maintain the device completely dry will result in the failure of the unit. 4. Check the charging plug and other accessories for signs of damage frequently.
< DRONE’S DETAILS > < TRANSMITTER FUNCTIONS > Indicator Light Propeller B TAIL Propeller A Speed Switch 360° Flip Right Joystick Left Joystick One Key Start/ Landing Headless Mode HEAD Propeller A Turn ON/OFF Propeller B < INSTALLATION > < LOW BATTERY WARNING > ① When the drone battery runs low, the indicator lights on the drone will blink continuously. About 1 minute or so the drone will automatically land on low electricity.
< JOYSTICK MODE > 1. MODE 2 (Left hand throttle Left Joystick Right Joystick Up Ascend Up < CHARGING > MODE 2 will be default setting.) USB Adapter (5V@0.5-2.0A) Forward Charging Indicator Power Bank Descend Down Right Left Turn Left Down Turn Right Left Backward Right Fly to Left Fly to Right 2. MODE 1 To enter MODE 1, turn on the transmittter while holding the “ Speed Switch ” button. (Please do not release the “ Speed Switch ” button until the transmitter is powered on.
< FLIGHT > < FLIGHT > All of the operations shown in this manual are demonstrated using MODE 2. 2. Calibrate the Gyro 1. Pair the Drone ----------------------------------------------------------- ① Connect the battery port access to the fuselage power port. HEAD TAIL As shown in the diagram above, push the left and right joystick simultaneously to the lower left corner to calibrate the gyro. The ② Place the drone on a flat and level surface with the head forward and the tail towards the pilot.
< TRIMMER > < SPEED SWITCH > F/B Sideward Fly Trim If the drone drifts forward, hold down the throttle joystick and do not release it while pushing the direction joystick down to balance the drone; If the drone drifts backwards, hold down the throttle joystick and do not release it while pushing the direction joystick up to balance the drone. ----------------------------------------------------------- L/R Sideward Fly Trim This drone comes with 3 speed modes (Low/ Medium/ High).
< HEADLESS MODE > < ALTITUDE-HOLD FUNCTION > The drone is designed with altitude-hold function so the drone can maintain its altitude after you release the left stick( the left stick will automatically spring back to the middle ). 1. After pairing/calibration, press the Headless Mode button on the transmitter. A beep will be heard from the transmitter, and the lights on the drone will keep blinking. The transmitter will beep slowly to indicate that drone is in Headless Mode. 2.
< SPECIFICATION > DRONE Model: HS210 Weight: 22g/ 0.77oz Flight Time: ＜7 minutes Motor Model: 0615 Operating Temperature Range: 14°F to +104°F (-10°C to +40°C) Dimensions: 80 x 80 x 30 mm ----------------------------------------------------------FLIGHT BATTERY Capacity: 220mAh Voltage: 3.
< GENERAL INFORMATION > < GENERAL INFORMATION > FCC Notice: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. WARNING: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
< GENERAL INFORMATION > ettre le fonctionnement. mauvais fonctionnement de I'appareil. Cet appareil numériquie de la classe B est conforme à la norme NMB-003 du Canada. CAN NMB-3 (B) RF Exposure Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The device has been evaluated to meet general RF exposure requirement.
< GENERAL INFORMATION > < GENERAL INFORMATION > 8. Never expose the LiPo battery to moisture or direct sunlight, or store it in a place where temperatures could exceed 60°C(car in the sun, for example). 9. Always keep it out of reach of children. 10. Improper battery use may result in a fire, explosion or other hazard. 11. Non-rechargeable batteries are not to be recharged. Rechargeable batteries are only to be charged under adult supervision. 12.
