132-05-SRevamp – IRON PCB PCB specification SMART Manual Approval by Checked by Originated by LS CMO KFL Page 1 5/3/2017 12:08:00 PM 1132-05-SRevampIRON-PCBSpec-V5.docx This document contains confidential and/or privileged information. Any unauthorized distribution of this document is strictly prohibited.
1132-05-SRevamp – IRON PCB PCB specification Versions Version Date Editor 1 01-09-2016 KFL 2 10-10-2016 CMO Modifications Initial release • • • • • Base for testing instructions Modify for cypress touch Chip version Cypress flashing FW instructions Changed to Accelerometer ST version Add the MAC label information 3 07-12-2016 CMO • • • • Completed the Production tests (especially DTM) Modified the QR code to a barre code Updated to V7 (BOM-SCH-Layout) Removed the Prog connector 4 17-02-2017 CMO •
1132-05-SRevamp – IRON PCB PCB specification Table of content Contents Versions 2 Table of content .................................................................................................................................................. 3 1 FCC Statement........................................................................................................................... 4 2 ISED statements ........................................................................................................
1132-05-SRevamp – IRON PCB PCB specification 1 FCC Statement This device complies with part 15 of the FCC Rules.
1132-05-SRevamp – IRON PCB PCB specification 2 ISED statements This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
1132-05-SRevamp – IRON PCB PCB specification 3 Notice to OEM integrator The end user manual shall include all required regulatory information/warning as show in this manual. The OEM integrator is responsible for testing their end-product for any additional compliance requirements required with this module installed.
1132-05-SRevamp – IRON PCB PCB specification 6 Mechanical specification 6.1 PCB dimensions and silkscreen The PCB size is 134.03 x 34.5 mm. The general tolerances on the PCB size are +/- 0.3mm. The PCB thickness is 2.0 mm. This is a 4 layers PCB. The PCB is mounted in the iron handle with 2 screws. Figure 1: Mechanical view of the board Figure 2: Top silk view Figure 3: Bottom silk view Property of SDATAWAY SA Page 5 5/3/2017 12:08:00 PM 1132-05-SRevampIRON-PCBSpec-V5.
1132-05-SRevamp – IRON PCB PCB specification 6.2 Layout version The layout version is printed on the edge of the PCB. Figure 4: Layout version indication The actual Layout version is the V7 6.3 Assembly version The assembly version must be manually written on the white box on the PCB during assembly. (Sticker is also possible) The Actual Assembly version is 01 7 Cables This PCB will include 2 different cables soldered on it.
1132-05-SRevamp – IRON PCB PCB specification The PCB will have the following connections: Name # Use Type Power input J2 Power input from power board Solder Fan button J3 Connected to the fan button *Located on the bottom side of the board Solder 9 Comments #1 = 12V #2 = GND #1 = 3V3 #2 = Button_Fan PCB MAC Sticker The MAC address information need to be known and scanned during the Machine assembly. It will show the UID (chip MAC address) and a barre code.
1132-05-SRevamp – IRON PCB PCB specification 9.2 Sticker 2 specifications The goal of this sticker is only for the production assembly line. It will be put on the handle visible when handle closed and it will be removed when the machine assembly is finished in the OEM. The sticker have to be easy to remove without leaving marks of glue. MAC address 21A510B39C5B SRevamp 2017-02 Machine name Production Year Production Week The sticker size will be in total 50mm x 25mm.
10 PCB specification The PCB shall be made with FR4 material, surface shall be tin plated and the PCB must be ROHS compliant. Model：SMART FCC ID: S96SMART IC: 22175- SMART Figure 5-1: Top view of the PCB Figure 5-2: Add Shield Case view Figure 6: Bottom view of the PCB 10.1 Electrical specification Voltages Stand-by power Typ 3.3, 12 < 0.5 Units V W 10.2 Schematics The PCB schematic is shown in the APPENDICE of this document. It is based on many pages showing different functions of the PCB.
10.3 BOM Like the Schematics, the BOM is also present in the APPENDICE. This BOM contains all the used components for the present version. The components are listed and are linked to the chosen manufacturer. The manufacturer Reference is listed to be able to check the good sourcing. Step Description Action 1 Voltage test 2 Start UART com 1. Measure voltage on TP12 2.
