Specifications

1132-05-SRevamp – IRON PCB
PCB specification
3 Notice to OEM integrator
The end user manual shall include all required regulatory information/warning as show in this manual.
The OEM integrator is responsible for testing their end-product for any additional compliance
requirements required with this module installed.
Must use the device only in host devices that meet the FCC/ISED RF exposure, which
means the host product manufacturer, to define the application general conditions (mobile, portable)
and additional text needed for the host product manufacturer to provide to end users in their end-
product manuals.
The end user manual shall include FCC Part 15 /ISED RSS GEN compliance statements related to the
transmitter as show in this manual.
Host manufacturer is responsible for compliance of the host system with module installed with all other
applicable requirements for the system such as Part 15 B, ICES 003.
Host manufacturer is strongly recommended to confirm compliance with FCC/ISED requirements for the
transmitter when the module is installed in the host.
Must have on the host device a label showing Contains FCC ID: S96SMART，
Contains IC: 22175-SMART.
The use condition limitations extend to professional users, then instructions must state that this
information also extends to the host manufacturer’s instruction manual.
This module is stand-alone modular. If the end product will involve the Multiple simultaneously
transmitting condition or different operational conditions for a stand-alone modular transmitter in a host,
host manufacturer have to consult with module manufacturer for the installation method in end system.
le manuel de l'utilisateur final doit inclure la partie 15 / (fac rss gen déclarations de conformité relatives
à l'émetteur que de montrer dans ce manuel.
le fabricant est responsable de la conformité de l'hôte, le système d'accueil avec le module installé avec
toutes les autres exigences applicables du système comme la partie 15 b, ices - 003.
accueillir le fabricant est fortement recommandé de confirmer la conformité avec les exigences de la
fcc /
(émetteur lorsque le module est installé dans l'hôte.
le dispositif d'accueil doivent avoir une étiquette indiquant contient FCC ID: S96SMART，
contient IC: 22175-SMART.
4 Machine label
Contains FCC ID : S96SMART , Contains IC: 22175-SMART
5 Introduction
The 1132-05 SRevamp IRON PCB is located in the iron handle and is the most important board of the
system. This board embeds an accelerometer to detect iron movements and a BLE chip to allow to
communicate with the ironing board.