Specifications

1132-05-SRevamp – IRON PCB
PCB specification
6.2 Layout version
The layout version is printed on the edge of the PCB.
Figure 4: Layout version indication
6.3 Assembly version
The assembly version must be manually written on the white box on the PCB during assembly.
(Sticker is also possible)
7 Cables
This PCB will include 2 different cables soldered on it.
One for the communication and power supply from the POWER PCB, and another for the connection to
the FAN button PCB, also located in the IRON.
These two drawings of cables are in the Appendix of this document.
8 Electrical specification
J2
Property of SDATAWAY SA Page 6 5/3/2017 12:08:00 PM
1132-05-SRevampIRON-PCBSpec-V5.docx
This document contains confidential and/or privileged information. Any unauthorized distribution of this document is strictly prohibited.
J3*
The actual Layout version is the V7
The Actual Assembly version is 01