Specifications

1132-05-SRevamp – IRON PCB
PCB specification
The PCB will have the following connections:
Name
#
Use
Type
Comments
Power input
J2
Power input from power board
Solder
#1 = 12V
#2 = GND
Fan button
J3
Connected to the fan button
*Located on the bottom side of the board
Solder
#1 = 3V3
#2 = Button_Fan
9 PCB MAC Sticker
The MAC address information need to be known and scanned during the Machine assembly.
It will show the UID (chip MAC address) and a barre code.
We will need 2 different stickers, one in the handle and another removable on the handle.
9.1 Sticker 1 specifications
MAC address
Machine name
Production Year
Production Week
The sticker size will be in total 30mm x 10mm.
The barre code height will be 5mm.
BE carefull of the MAC BYTES ORDER. Refer to the Test page for getting the Bytes, then put it as
Byte1
Byte2
Byte3
Byte4
Byte5
Byte6
The Sticker will be placed as following:
The sticker will be put in the
handle on the plastic as the
picture shows
Property of SDATAWAY SA Page 7 5/3/2017 12:08:00 PM
1132-05-SRevampIRON-PCBSpec-V5.docx
This document contains confidential and/or privileged information. Any unauthorized distribution of this document is strictly prohibited.
21A510B39C5B
SRevamp 2017-02