Users Manual

Remote control
Magnetic ring
Brown single wire
8
2
Roll rachis
M8*30 8
M6*20 4
M6 8Lock nut
M5*8 1Bolt
3
3.
2. Put the Left/Right side cover(18/19) onto the upright tube as the left picture. Then use two
fixed pins(34) to lock the left/right upright tube onto the main frame tightly. (NOTE: Before
put the right side cover (19) onto upright, the wire A shall be assembled like left pucture to
avoid pressing wire.)
1336*798*1085mm
1505*798*150mm
Press once to get into pause status. Press twice to clear the data.
When the mode isswitched to flat walking mode, the safety key is invalid. Only when it is under the
running mode can the safety key work normally. Under the running mode, the safety key should be
placed in the designatedposition before controlling the treadmill. Take off the safety key, and the LED
window of the computer shows "---", accompanied by a warning sound. If the safety keyis taken off
in the running state, the system will quickly stop. When you put back the safety key, all the running
data will be reset.
Shenzhen Taban Technology Co., Ltd.
Add:
8D-3, International Trade Commercial and
Residential Building, No. 3009, Nanhu Road, Jiabei
Community, Nanhu Street, Luohu District, Shenzhen
MK-1009