BARCODE SCANNER User Manual Customer Service: server@nadamoo.cn nadamoo@126.com V2.
In order to correctly use the bar code scanner, please read the instruction carefully and do not arbitrarily scan the setting codes, otherwise some settings may not be available temporarily. Please note that this scanner is a laser bar code scanner, it can not scan barcode on screen. All the bar code on the digital manual should be printed to scan! Please keep this instruction for reference in the future.
Contents Technical Parameter ........................................................ Packing list ........................................................ ..... 4 Battery & Charging ........................................................ 4 Quick Start Guide 1. 2.4G Wireless connection device 3 ........................................................ 5 ........................................................ 5 ........................................................ 8 ......................
Technical Parameter Mfr P/N Connection technology 2.4 GHz Radio Wireless+Wired Max Transmission Range 100m in 2.
Packing list •Barcode scanner*1 •USB Cable*1 •Instruction Manual*1 •USB Wireless Receiver*1 Battery & Charging The scanner is powered by 1400mAh rechargeable battery. Please charge the scanner at least 30 minutes before use to ensure that the scanner has enough power. Insert one end of USB cable into the bottom of scanner, and insert another end to computer USB interface or 5V DC USB interface adapter.
Quick Start Guide When the USB cable is inserted in, the scanner will automatically switch to wired mode. Connection mode indication: When the light on the top of the scanner turns green, it indicates the scanner is in 2.4 GHz wireless mode. It is suggested to use 2.
2. 2.4GHz wireless mode quick start guide --To use the scanner on computer STEP1. Scan the following code “2.4GHz Wireless Mode” to 2.4Ghz wireless mode. When the light on the top of the scanner turns green, it means the scanner successfully changes mode to 2.4GHz Wireless Mode. 2.4GHz wireless mode STEP2. Plug the USB receiver in to USB port of your computer, within 30 seconds, scan the code “match” to pair the scanner with the USB receiver.
3.Wired mode quick start guide STEP1. Connect the scanner to your computer via USB cable. When the USB cable is inserted in, the scanner will automatically switch to the wired mode by default. STEP2. Open notepad on computer, move cursor to the blank, scan a barcode to see if it can be uploaded. NOTE : In the case where the current mode is 2.4G mode，if the USB cable is inserted in， the scanner will automatically switch to wired mode， the light of the scanner is stay blue.
Answer： After resetting the scanner into factory settings, the scanner was set to by default. 2.4G mode If you want to use it in 2.4G wireless mode, please connect the scanner to you computer via USB receiver, and then scan the following codes "2.4GHz Wireless mode" "Match" "instant upload mode". There may be some other reasons for this issue. Please troubleshoot the product according to the troubleshooting instruction on page 12. Q3. Some barcodes can not be read, why? Answer： A.
get, our customer service will help you to solve the problem. Q5. Is there any barcodes to remove auto-enter after every scanning? Answer: To remove the auto-enter, please read the code “disable suffix” on page 29. Q6. Why does scanner not read the first digit of UPCE barcode. Answer: To enable the scanner to read the first digit of UPCE, system digit”on page 31. Q7. How to add TAB? Answer: To add TAB, read the code “TAB” on page 29.
Troubleshooting (2.4Ghz wireless Mode) Problem Insert the USB receiver into the PC‘s USB port, the receiver’s light does not light up. Power on the scanner, the scanner has no reaction. the buzzer does not beep, the green light on the top of scanner does not turn on, the red scanning laser does not show up. The scanner can not hold the charge. Power on the scanner, the buzzer beeps, the green light on the top of scanner will be on, the red scanning laser does not show up or become a dot.
Optional Function Settings Settings of the barcode scanner can be changed by scanning the setup barcodes included in this manual. 1. Switch Connection Mode There are 2 operations to switch the mode. 1) Scan desired code to select the mode. 2.4GHz wireless mode 2) Press and hold the button for 10 seconds to change the mode Connection mode indication: When the light on the top of the scanner turns green, it indicates the scanner is in 2.4 GHz wireless mode.
3. 2.4GHz Wireless Mode Pairing Setting In 2.4GHz wireless mode, two kinds of pairing modes are supported. 3.1 One scanner to one receiver：One scanner only sends barcode to one receiver.
Several units can work independently with different computers in the same area. They won't interface with each other during work. If you want to use them on multiple computers, each with own scanner and receiver. Please follow the setps （1）Plug the USB receiver A into PC A. （2）Scan the code “match”using scanner A to pair the scanner A with the receiver A.
3.2. Max.32 Scanner - to - One receiver Multiple scanners send barcode to one USB receiver. connect to 32 scanners at most. One USB receiver can Pairing operation: （1）Plug the USB receiver A into PC‘s USB port （2）Scan the code “match”using scanner A to pair the scanner A with the receiver A （3）Unplug the USB receiver A and plug it to PC‘s USB port again （4）Scan the code “match”using scanner B to pair the scanner B with the receiver A ...
4. Upload Mode Setting Two kinds of upload modes are supported in 2.4GHz wirelelss mode. 4.1. Instant Upload Mode ： Read barcodes and upload it straight to the file you have opened. ** To set the scanner to upload barcode instantly, scan the following code: Instant upload mode Scanning indication: (1) The blue/green indicator light flashes once and the buzzer beeps once when the barcode is uploaded successfully.
Speed 50 Speed 40 Speed 60 4.2. Storage mode ： Read barcodes and store the barcodes in scanner ’ s own memory. You can upload the data to computer in batchs when you need them. Internal storage saves up to 100,000 barcodes. Note： In storage mode, the barcode will be stored in the scanner and will not come up on your computer instantly.
Show total storage ** Scan the barcode“Zero clearing”to clear all stored barcode. (for storage mode only).
Speed 040 Speed 050 Speed 060 5.
6. Scanning Mode Setting 2.4GHz wirelelss mode. 6.1. Manual trigger mode (default) : User press the trigger, the scanner will emit a red light to read the barcode. When user release the tigger, the red light will go off. ** Scan the following codes to set the scanner to Manual trigger mode . Manual trigger mode (default) 6.2. Continuous scanning mode There’s no need to click the trigger in this mode. The red light of the scanner will be on all the time.
8. Interface Setting Two kind of Interface are supported. 8.1. USB-HID mode In the HID protocol, there are 2 entities: the "host" and the "device". The host communicates with the device and receives input data from the device on actions performed by the human. The most common example of a "host" is a PC. The "device" is the entity that directly interacts with a human, such as a keyboard or mouse.
9. Identity Barcode Type This setting is to identify what type of the barcode is, follow the below steps to confirm: Situation 1: Scan the code "Add ID front-on" below, then scan your goal barcode, there will be a character BEFORE the barcode you scanned, and this character states your Barcode Type. After that, if you don't need this prefix any more, please scan the code "Add ID front-Off (default)" to hide it.
10. Keyboard Language Setting The scanner support 25 international keyboards: You are suggested to set the keyboard type of the scanner to be in agreement with that in real use by scanning the correspondent barcode listed below.
SWITZERLAND (FRENCH) CZECHOSLOVAKIA (CZECH) NETHERLANDS SWITZERLAND (GERMAN) CZECHOSLOVAKIA (SLOVAK) NORWAY UNITED KINGDOM DENMARK POLAND UNIVERSAL FINLAND PORTUGAL 27
11. Case Sensitivity Setting The scanner can change all the letter cases of barcode into uppercase or lowercase. Letter case of barcodes can be altered through scanning correspondent bar code below. All Capital All lowercase Swap Capital/ lowercase Cancel capital/lowercase settings 12. Power Off Setting The scanner will be powered off if there is no operation on it in 2 mins by default. Short press on the trigger can wake it up.
13. Restore factory setting To set the scanner to factory settings, please scan the code: Restore factory setting 14. End character setting By default，the scanner is sending a 'carriage return' after scanning a code (the same as pressing the 'enter' key) .
15. Barcode Setting The code ending with word "*" is the default settings.
Show UPCE check digit* Hide UPCE check digit Show UPCE system digit Hide UPCE system digit* UPCE to UPCA-Enable UPCE to UPCA-Disable* EAN13 EAN13-Enable* EAN13-Disable Show EAN13 check digit* Hide EAN13 check digit EAN13 to ISBN-Enable EAN13 to ISBN - Disable* EAN13 to ISSN - Enable EAN13 to ISSN - Disable* 31
EAN8 EAN8 - Enable* EAN8-Disable Show EAN8 check digit* Hide EAN8 check digit UPC/EAN Extra code UPC/EAN extra code-Enable UPC/EAN extra code-Disable* Code39 Code39-Enable* Code39-Disable Code39 FullASCII-Enable Code39FullSCII-Disable* Show Code39 start/stop digit Hide Code39 start/stop digit* 32
Code32 Code32- Enable Code32-Disable* Code128 Code128-Enable* Code128-Disable Code93 Code93-Enable* Code93-Disable Code11 Code11-Enable* Code11-Disabel CODABAR CODABAR-Enable* CODABAR-Disable 33
Show CODABAR start/stop digit Hide CODABAR start/stop digit Industrial 2 of 5 Industrial 2 of 5 -Enable* Industrial 2 of 5 -Disable Interleaved 2 of 5 Interleaved 2 of 5 -Enable* Interleaved 2 of 5 -Disable MSI MSI-Enable MSI-Disable 34
16. Insert and delete character The barcode scanners permit special characters to be added at the beginning (prefix) or end (suffix) of the scanned barcode. The character also can be deleted. First step： Scan one of the following setup code to choose the event. Insert character Delete character Second step：Scan one of the following setup code to choose the barcode type.
Interleaved 2 of 5 Industrial 2 of 5 MSI Code11 China post GS1D GD1L GS1E Code32 Note：if you do not choose the barcode type, the setting will take effect for all barcode type by default. Third step : Scan one of the following setup code to choose the data group.
Group 6 Group 5 Group 7 Group 8 Note 1： if you do not choose the data group, the scanner will take “Data group 1” as default setting. Note 2: The data group is used to distinguish between different setting events. it work on the following circumstances: 1).Differentiating the setting for different barcode types 2).Distinguish add / delete prefix or suffix Different events can take effect at the same time.
If you want to put "A" before barcode, put "B" after barcode. The setting steps is ： Insert charater > All barcode type > Data group 1 > Before barcode > 065 A > Saving settings Insert charater> All barcode type > Data group 2 > After barcode > 066 B> Saving settings After that, when the scanner read barcode 123456789, the barcode received by the computer will be A123456789B.
004 EOT Four characters 005 ENQ Five characters 006 ACK Six characters 007 BEL Seven characters 008 Back Space Eight characters 009 HT/TAB Nine characters 010 LF Ten characters Sixth steps： Scan the below code to save the setting Save setting To remove the insert setting，scan the following code in order Insert character Clear setting To remove the insert setting，scan the following code in order Delete character Clear setting 39
40
41
42
43
44
45
FCC STATEMENT Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
