User's Manual

21
Show total storage
** Scan the barcode“Zero clearing”to clear all stored barcode. (for storage mode only).
Zero clearing
Scanning indication:
(1) The blue/green indicator light flashes once and the buzzer rang a fast "DI-en" when
the barcode is saved successfully in the built-in memory of the scanner
(2) The red indicator light flashes once and the buzzer rang a slow "DI---en" when the
barcode can not be saved in the built-in memory of the scanner, because the space of
memory is not enough and cannot store any more barcodes. Please upload the saved
barcode by scanning the code "Upload Data" and then clear the saved barcode by
scanning code "zero clearing".
Note 1:
In storage mode, the transmission speed between every barcode can be changed by
scanining the following code. The higher the value, the slower the speed is.
Note 2：
If the character upload speed（on page 19） is set to a slower speed，and the barcode
upload speed is set to a higher speed. When uploading data in storage mode, the data
maybe be lost. If some character or barcode are missing, please set the scanner to
lower barcode transmission speed.
Speed 000* （wireless default） Speed 005