User's Guide
Table Of Contents
19
3. Select analog input type according to analog device type.
Note: Ensure DIP switches has changed before changing “Analog Input Signal Type” to 0-10V.
4. Enable “Interface 1 (Pin 1) 5V/9V/12V” and configure “Power Output Time Before Collect”,
UC50x will power the analog devices for a period of time before collecting data.
Note: When you use power output to power analog devices, it only supplies power when
reporting interval is coming. It’s suggested to power slave devices with external power during
the PoC test.
5. For ToolBox software, click “Fetch” to check if UC50x can read correct data from analog
devices.