User's Guide

3. For UC501, click and go to “Basic Settings” to change class type the same as device

settings.

4. After UC50x is online in Milesight IoT Cloud, click and go to “Interface Settings” to

select used interfaces and customize the name, sign and formulas.

Note: Modbus channel settings should be the same as the configuration in ToolBox.

7. Device Payload

UC50x Series use the standard Milesight IoT payload format based on IPSO. Please refer to the

UC50x Series Communication Protocol; for decoders of Milesight IoT products please click

here.

-END-