User's Guide

10
3.3 General Settings
Go to “Device->Setting->General Settings” of ToolBox App to change the reporting interval, etc.
Parameters Description
Reporting Interval Reporting interval of battery level to network server. Default: 1080 min
Change Password Change the password for ToolBox App to write this device.
3.4 LoRa D2D Settings
LoRa D2D protocol is developed by Milesight and used for setting up transmission among
Milesight LoRaWAN
®
devices without gateway. When the LoRa D2D setting is enabled, WS136 &
WS156 can work as a LoRa D2D controller for sending control commands to trigger LoRa D2D
agent devices.
1. Ensure the RX2 datarate and RX2 frequency in LoRaWAN settings are the same as the LoRa
D2D agent device.