User's Guide

Fixed by 3M Tapes:

Paste 3M tape to the back of the panel, then tear the other side and place it on a flat surface.

Please note the screen direction when installing.

Fixed by 86 Box:

Remove the back cover of the panel, screw the back cover to the 86 box with two M4 mounting

screws, then install back the panel. Please note the screen direction when installing.

5. Device Payload

All data are based on the following format(HEX), the Data field should follow little -endian:

Channel1

Type1

Data1

Channel2

Type2

Data2

Channel 3

...

1 Byte

N Bytes

1 Byte

M Bytes

1 Byte

...

For decoder examples you can find them at https://github.com/Milesight-IoT/SensorDecoders.

5.1 Basic Information

WS136 & WS156 report basic information of panel whenever joining the network.

Channel

Type

Description

01(Protocol Version)

01=> V1

09 (Hardware Version)

01 40 => V1.4

0a (Software Version)

01 14 => V1.14

0b (Power On)

Device is on

16 (Device SN)

16 digits