THANKS Congratulations! Welcome to a New Life crested by wireless neckband hearing amplifier.
Configuration @ 01 Neckband Hearing Amplifier Earphone Microphone Charging port Volume up Volume down Indicator light @ offing switch €3 Multi-function button €) Dome 0d
1. Charge with Micro-USB cable Smaller end-— Larger end Charging the hearing amplifier is similar to charging a cellphone. a} Plug the larger end of the charging cable into the adapter. b} Plug the smaller end into the USB port on the device, ©} Plug the adapter Into a power outlet.
3. How to wear 1} As shown above, slightly ft both ends of the device over the head, wear around the neck with control panel facing up. 2} Insert the earphones into both ears. Hattie: The lime was preset Fer prod Lesion TEs recon mended to feel ad lust volume according to your [Individual need, 5 4. Adjust volume “alum up {Both zai Value down (Both esr / 3 As shown above, short press “volumes” to increase volume, short press “volume" to decrease volume. Abstention There ore toad] of nine levels of volume.
5. How to connect with your smart phone: automatically enter the connecting state after booting. Z}Enable the Bluetooth on smart phone and connect with "BWS2%, AW unsuccessful connection within 1 minute, need to restart. Enable Bluetooth un your phone Pair automatically when task out @ < sua Helvetian Surge sable David ame Facetious fails AYALA EVES. 3 Wazoo Search for” BWE2™ and tap to connect 07 6.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to persist the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FOC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
