User's Manual

Service Calling System User Manual----English Version
- 24 -
F3—vibration setting；
F4—set service functions；
F5—work as the display of signal repeater
Please use the selection keys [Ç] [È] to select each item and press key
to enter
and carry out setting.
4.2.7.1 Time Set
Select F1, and enter it to set time.
Use selection keys [Ç] [È] to increase/decrease the digit (Note: you can also press the
selection keys and hold it to increase/decrease the digit quickly.). Use key
to shift
hour or minute. Press key
to confirm the setting. Press cancel key [C] to exit.
4.2.7.2 Table Number Set (match with calling device)
Select F2 and enter it. The LCD display “-Add, -Del, -Que”, which means to add,
delete and query the number of the calling device (or table number).
(1) Add the number of the calling device (or table number)
To add the number of calling device (or table number) to the display device is to
match the two devices. Only the matching operation has been done can the calling device
work.
After entering the F2 mode, use selection keys [Ç] [È] to select “-Add” and enter it.
Use selection keys [Ç] [È] to increase/decrease the digit (Note: you can also press
the selection keys and hold it to quickly increase/decrease the digit.)
Use key
to shift units /tens /hundreds digit.
After you select the table number on WD1X/PD1X, press key [WATER] and [BILL]