User's Manual

Service Calling System User Manual----English Version
- 27 -
Press cancel key [C] to exit.
4.2.7.5 Display Signal Repeater Information
Select F5, and enter it. In this mode, the display device will work as the display
screen of the signal repeater while users setting its parameters, such as RF repeater code,
shop ID. Please refer to chapter 4.4 for detail.
4.2.7.6 Malfunction Test
Press key for 2s, and then WD1X/PD1X will display -F1, -F2, -F3,-F4 and –F5.
Press [È] [Ç] key to select an item and then press
to enter the test mode.
 -F1: Wirelessness Test Mode
Enter F1, and then the LCD displays:
X stands for 5-digit ID number of the service caller.
x stands for the key value. E.g. If press [C] on SC2X/SC1X, it will display the key
value ‘1’. [WATER] key value is ‘8’; [CALL] key value is ‘4’; [BILL] key value is ‘2’. If
press [CALL] and [C] key simultaneously, it will display the key value ‘5’.
Note: If the key value is displayed as ‘F’, it stands for an unidentified key value,
which means several keys are pressed simultaneously on Service Caller or
malfunctions exist.
Y stands for the size of the receive data.
X X X X
X x T
Y Y Z Z