User's Manual

Service Calling System User Manual----English Version
36
display as follow:
The digit “24841” is the ID of the matched caller. “Ad” indicates that it is to add the
calling device to the repeater.
Delete calling devices from RF repeaters:
After entering the matching mode, press
[CALL] and [C] key simultaneously on SC2X to delete the ID of the calling device from
the RF repeater, so that the two are not matched. Then the WD1X/PD1X display device
will show the ID of the caller. The screen display as follow:
The digit “24841” is the ID of the caller to delete. “dE” indicates that it is to delete the
calling device from the repeater.
5.4.3.4 Exit the Mode of Parameter Setting
If the RF repeater is in a specific setting mode (set repeater code/shop ID or match
with calling devices), users could press [BILL] and [C] keys simultaneously on the calling
device to make the RF repeater exit from the mode of setting wireless parameters.
S C I d
2 4 8 4
1 A d
S C I d
2 4 8 4
1 d E