User's Manual

Service Calling System User Manual----English Version
- 11 -
Method 2: Use glue paper to stick SC2X on the table.
Instead of screws mentioned in method 1, back glue paper with high intensity of
stickiness is able to stick on any position of the table.
3.4.3 Print Table Number Label
1) Double click ‘Print label.exe’ program in the attached CD disk to edit table numbers.
Note: The font and color of the table number can be edited in ‘Set’ menu.
2) After editing table numbers, click ‘File/Preview’ to preview it.
3) Click the icon
at the toolbar and then click ‘print’ button to print the label.
4) Cut down each table number label into a piece as chapter 2.4.4.
Input the table number not
more than 3 digits in the blank.
Rip off the glue paper on the back of
SC2X, and then paste SC2X on the table.