User's Manual

14
LUBRICATING THE TREADMILL
IMPORTANT NOTE:
STEP 4:
Secure the Top Console (No. 89) to Left & Right
Support Tubes (No. 13 & No. 14) using 2
Half-roundhead Hex Bolts (No. 15) and 2
Serrated Gaskets (No. 18). Tighten and secure
with Allen Wrench (No. 87). Next, insert the Safety
Key (No. 1) into the Top Console (No. 89).
STEP 5:
You may now remove the packing belt.
The assembly is complete!
STEP 5:
You may now remove the packing belt.
IMPORTANT NOTE: The running belt must be
lubricated before the first use! Please see Page 14
for instructions on how to properly apply lubricant.
The assembly is complete!
The assembly is complete!