User's Manual

15
You will need to lubricate your treadmill before the first use!
RUNNING BELTS & TREADMILL LUBRICANT:
Lubricating the Running Belt (No. 50) and Running Board (No. 49) is essential as the friction
affects the life span and operations of the treadmill. Inspect the Running Belt (No. 50) regularly. If
you find any wear on the Running Board (No. 49), please contact us at
[e-mail].
WARNING: Always unplug the treadmill from the electrical outlet before cleaning, lubricating, or
repairing the unit.
The following timetable is recommended:
Light user (less than 3 hours/ week) every 2 months
Medium user (3-5 hours/ week) every 45 days
Heavy user (more than 5 hours/ week) every month
NOTE:
To better maintain the treadmill and prolong its life, it is suggested that the treadmill be powered
off for 10 minutes every 2 hours and fully powered off whenever not in use.
A loose Running Belt (No. 50) will result in the runner sliding off when in use, while too tight of a
Running Belt (No. 50) will decrease to the motors performance and also create more friction
between the roller and Running Belt (No. 50). The most suitable tightness for the Running Belt
(No. 50) is pulled out 50-75 mm from the Running Board (No. 49).
MAINTENANCE GUIDE
General cleaning will help to prolong the life and improve the performance of your treadmill. Keep