User's Manual

Basic Operations
10
Note: If the IFP does not receive a displaying signal for a certain time, the IFP goes into standby mode.
Plug the power cord into an AC Power outlet. Press Power Switch on the IFP.
Now the IFP is in standby mode. Wait a moment until the power indicator lights up, then press POWER to turn
on the IFP. (Be sure to wait for a few seconds before pressing POWER button. If you promptly press POWER
button then the IFP may not respond or act wrongly.)
Press button again to turn off the IFP and put the IFP in standby mode.
To cut off the power completely, press Power Switch on the IFP.
1
2
3
Turning the IFP on or off
Operating the Float menu
Switch to the Home page.(Android Interface)
Switch to different input source,
i.e. HDMI, VGA, etc.
1
2
Touch the bottom of the screen and drag upward to make appear.
Press and drag to any place of the screen.
Touch once to control the MENU appear.
When displaying at USB, DVD interface, touch once at the lower part of the screen,
the display control menu will appear.
Touch once to control the MENU disappear.
Exit to the current system
or return to previous.
Switch to the display menu screen
Volume up
Volume down