User's Manual

Network Settings(Continued)

Wired Network Setting ( )Internal router

Select Easy Set Wizard

Select Gateway

There are five methods to connect with network,

choose your preferred one.

Recommended to select the DHCP Client connection.

Automatically obtain IP information from your ISP.

If all Internet IP information is provided by

your ISP, then choose Static IP.

Automatically obtain IP information from

your ISP. If your ISP doesn’t provide a designated IP

for you, then choose DHCP Client.

Ethernet Point to Protocol. Your ISP will

provide you with Login ID and password. Usually this

option is applicable to DSL service.

Point to Point Tunneling Protocol. Your ISP will

provide you with Login ID and password.

Layer 2 Tunneling Protocol. Your ISP will

provide you with Login ID and password. Usually this

option is applicable to DSL service.

Static IP:

DHCP Client:

PPPOE:

PPTP:

L2TP:

Passward Setting Format

WiFi Password of Internal

Router in the IFP.

(Password should be set at

least 8 characters. )

Method 1: Easy Set Wizard

Input the default UserName: admin, skip the default

password setting as there is no default password,

then press Login button login.

Changed setting successfully.

Get IP,

Finished