User's Manual

17
Network Settings(Continued)
Wireless Network Setting ( )Internal router
Method 1: Easy Set Wizard (For example, )WAN lnterface:5G
Select Easy Set Wizard
Select Wireless ISP
Next
Input the default UserName: admin, skip the default
password setting as there is no default password,
then press Login button login.
There are five methods to connect with network,
choose your preferred one.
Recommended to select the DHCP Client connection.
Automatically obtain IP information from your ISP.
If all Internet IP information is provided by
your ISP, then choose Static IP.
Automatically obtain IP information from
your ISP. If your ISP doesn’t provide a designated IP
for you, then choose DHCP Client.
Ethernet Point to Protocol. Your ISP will
provide you with Login ID and password. Usually this
option is applicable to DSL service.
Point to Point Tunneling Protocol. Your ISP will
provide you with Login ID and password.
Layer 2 Tunneling Protocol. Your ISP will
provide you with Login ID and password. Usually this
option is applicable to DSL service.
Static IP:
DHCP Client:
PPPOE:
PPTP:
L2TP:
Passward Setting Format
WiFi Password of Internal
Router in the IFP.
(Password should be set at
least 8 characters. )
Finished
Successfully
connected to return .
Select Site Survey
Select from 5G, 2.4G.
Confirm
Site Survey
Select your desired WiFi signal.
Connect
Input Password
The wireless networks is
based on the WAN Interface.
Next
Get IP,
Changed setting successfully.