Manualshelf

User's Manual

ManualsBrandsXiamen Puxing Electronics Science & Technology ManualsElectronicsTwo Way Radio
12345678910
Hold down the FUN key and turn on the unit until “RESET?” is displayed. Press
ENTER until “VFO?
” is shown on the display; push it again for confirmation.
3. Delete all settings (Delete the settings in both frequency and channel mode)
Hold down FUN key and turn on the unit until display “RESET?”, press ENT until
display “VFO?”. Turn the Encoder knob to select “FULL?”, then press ENT to
delete all the settings in Frequency and VFO mode.
FM RADIO function
This radio has a FM radio function, click [FUN] key screen displays "F" icon, then
press the side key 3 to enter or exit the FM radio feature.
● on-site alarm
Press the emergency call button, radio sounds alarm tone, while sending the alarm
tone and ANI personal identification code to your partner, press [PTT] key to cancel
the alarm.
● Busy Lockout
This feature prevents interference with other radio in this channel,
dealer can use pc software to set, it provides the following two options:
◆ Carrier: When the radio receiving signal, not transmitted.
◆ CTCSS tone: When the radio receives a signal, if it receives the same
carrier, different sub-audio, the radio can be transmition. if the radio
receive the same carrier and CTCSS exactly, transmition is prevented.
Function key FUN
1)
As the storage key: In frequency m
ode, setting all information in frequency
mode, press FUN key and press VFO/MR key until “F” icon and channel
number flashing on corner, to storage the channel, press VFO/MR key.
2)
As the function key, in key lock m
ode, press FUN key and rotate the knob to
enter the menu function.
3)
As the high/low output power switch, press FUN key and press PTT key
4) As the keylock button, press FUN and press ENT to lock the keypad.
5)
As the frequency step key, in frequency m
ode, press and hold FUN key, the
number above the “MHZ” is flashing, rotate the knob to increase/decrease the
frequency (1MHZ), release FUN key to change the frequency as per current
frequency step.
6)
As the clear key: press and hold FUN key and turn ON power to enter the all
clearance m
ode.