User's Manual

Through the programming software can be preset 16 group encryption, encryption key (4 byte), according to
preliminary programming encryption key encryption on or off.
If the encryption type, intercom has assigned the main screen displays encryption or no encryption ICONS.
DTMF signal set
DTMF signal receiving/launch system has four (programming software setting), 32 codes can be set, each group
of up to 30 characters.
The called party: the called party can be set by programming software decoding response types, as follows:
Remote shoot: when the radio receives the remote after death, the interphone receiving/launch is prohibited.
Activation: radio remote shoot conditions, receives the activation code is walkie-talkie back to normal.
Die/activation function
You can activate or remote shoot any intercom system.For example, you may want to disable a stolen interphone,
prevent the thieves use it, and enable it when back.
Note: perform radio remote shoot or activate only activate the intercom with these functions and is only suitable
for single call.
Radio remote shoot
Use the menu function:
1. Press [OK] key to enter the menu mode.
2. Click [delta or del] key to address book, and then press [0 k] key choice, entries arranged in
alphabetical order.
3. Press [delta or del] to the alias name or ID, and then press [0 k] key choice.
Or press [delta or del] key to manual dialing, and then press twice [0 k] key input user alias or ID, and
then press [0 k] key choice.
4. Click [delta or del] key to radio remote shoot, and then press [0 k] key choice.
5. The screen display radio remote shoot: < user alias or ID > and the LED indicator for the red light.
6. Wait for confirmation.